Removing
1. Loosen the screws.
2. Disconnect the handles from the shift and gear selector levers.
3. Loosen the four mounting bolts.
4. Remove the rubber cover trim on the gear lever.
5. Remove the rubber cover from the floor opening and levers.
6. Remove the boot from the edge of the arm support plate.
7. Remove the three bolts in the center of the shift lever.
8. Now you can remove the lever.
Installation
Installation is carried out as follows:
1. Lubricate the ball bearing with oil.
2. Insert shift lever.
3. Insert a base sheet.
4. Fasten the shift lever with three bolts.
5. Other work is performed in the reverse order of removal.
Visitor comments