Removal and installation windshield wiper arms (Opel Frontera A)

1. Turn the windshield wiper on and off again.

2. Mark the stopping position of both wipers on the tape attached to the windshield to reset them to their original position.

3. Remove the wiper support cap.

4. Unscrew the nut underneath it, remove the washer and lever from the spindle. If necessary, you can use a small screwdriver. Be careful not to damage the paintwork.

The lever is installed in the reverse order of removal. After installation, check that the brushes have returned to their original position. A wind deflector is installed on one lever.

[Material copied from this website: www.opelbook.ru]