Frontera Sport
1. Remove the wiper arm, brush and inner drive motor cover (unscrew 2 screws).
2. Disconnect the plug connection.
3. Remove the screw, nut and bushings of the motor holder.
4. Remove the nut, washer and bushings from the motor shaft and remove the motor. The motor mount is shown in the illustration.
The wiper is installed in the reverse order of removal.
1. Tighten the electric motor fastening nuts to a torque of 6 Nm, the holder fastening bolt and nut to a torque of 4 Nm.
2. Before installing the wiper arm and brush, turn the motor on and off briefly, making sure that the motor shaft returns to its original position.
Frontera
1. Remove internal facing of a door of a back and remove from the inside of a door of a cover of openings.
2. Remove the wiper arm and brush.
3. Turn away a nut, remove a washer and the plug from an axis of a cleaner.
4. Disconnect the plug connection.
5. Turn away four bolts of fastening and remove the electric motor of a cleaner with driving drafts.
6. Remove the rods from the electric motor, unscrew the three mounting bolts and remove the electric motor from the plate.
The wiper is installed in the reverse order of removal.
Visitor comments