Checking the adjustment of the cable system of the gear shift drive
Move the shift lever sequentially to position P, R, N, D, 3, 2, 1.
At the same time, press the fixing head.
The control lever 1 on the gearbox must be fixed accordingly: P 2, R, N, D, 3, 2, 1.
Locking clip 3 on the cable system of the gear change drive, unlock upwards.
Use a suitable screwdriver.
Move the gear lever to the position «R».
By moving the gear lever back and forth, without pressing the locking head, it is necessary to achieve the correct fixation of the gear lever in the position «R».
Turn the control lever 1 on the gearbox to the stop 2.
Rotate the front wheels until the latch engages in the wheel of the parking mechanism.
Fix the fixing clip 3 on the cable system of the gear change drive.
Push down the locking clip.
Visitor comments