1. Remove the car radio (see Removal and installation of the car radio).
2. Squeeze the tabs..
3.... and remove the socket block for additional electrical consumers and the USB connector from the instrument panel.
4. Squeeze the latch..
5.... and disconnect the wiring harness block from the USB connector.
6. Squeeze the latch..
7.... and disconnect the wiring harness block from the socket of additional electrical consumers.
8. Remove the unit from the vehicle.
9. Squeeze the USB connector latch..
10.... and remove the connector from the block.
Note. It looks like a USB connector removed from the car.
11. Install the removed parts in the reverse order of removal.
Visitor comments