2. Remove the front wheels from the vehicle.
3. Disconnect the anti-roll bar from the front suspension strut.
4. Using a suitable jack, support the lower front suspension arm.
5. If equipped, disconnect the wheel speed sensor electrical connector from the front suspension strut.
6. Remove the brake hose, connector and clip from the front suspension strut.
7. Loosen two nuts (1) swivel fist.
Note.
Nut tightening torque (1):
- First stage: 85 Nm.
- Second stage: another 60°.
8. Remove bolts (2) and send to the scrap. When installing, use only new bolts.
9. If equipped, remove the plastic cover.
10. Using the key CH 49375, unscrew the nut (3) top mounting of the front suspension strut.
Note. Tightening torque of the front suspension strut upper mount nut: 55 Nm.
11. Remove the front suspension strut (4).
12. Installation is made in an order, the return to removal.
Attention. The front suspension strut is equipped with fasteners that are tightened to the yield point. When installing the rack, you must use new fasteners. Failure to do so may result in damage to the rack or the vehicle as a whole.
Visitor comments