2. Remove the front wheels from the vehicle.
3. In versions with all-wheel drive: remove the cardan shaft.
4. Disconnect the stabilizer struts.
5. Using a suitable hydraulic strut, support the rear of the subframe.
6. To turn away a bolt of a back support of a transmission.
7. To turn away bolts of back fastening of a subframe to a body.
8. Lower the rear of the subframe by no more than 50 mm to create the necessary access to the anti-roll bar.
9. Remove four bolts (1) mounting bar stabilizer bar.
Note. Tightening torque: 22 Nm.
10. Remove the anti-roll bar.
11. Installation is made in an order, the return to removal.
Visitor comments