2. Compress the spring (4), using tool CH-6068 to unload the top of the rack.
3. Loosen the nut (2) suspension struts.
4. Remove washer (3) racks.
5. Remove the following front suspension strut components:
- Mounting insulator (2) (check for damage and replace if necessary).
- mounting bearing (3) (check for damage and replace if necessary).
- Buffer (4) (check for damage and replace if necessary).
- Insulator (5) (check for damage and replace if necessary).
- spring (6) with installed fixture CH-6068 (1).
6. Release the spring and check for damage and replace if necessary.
7. Pull out the rack (7) from holder CH-6066 (8).
8. Remove the lower insulator (1). Check for damage and replace if necessary.
Assembly
Assembly is carried out in the reverse order of disassembly.
Visitor comments