2. Remove the rear wheel from the vehicle.
3. Loosen the inner bolt (1) rear upper arm mountings.
Note.
- Tightening torque: 70 Nm + 90°+ 15°.
- Tighten the nut while holding the bolt from turning.
4. Loosen the outer bolt (2) rear upper arm mountings.
Note.
- Tightening torque: 115 Nm + 90°+ 15°.
- Tighten the nut while holding the bolt from turning.
5. Remove the upper arm of the rear suspension (3).
6. Installation is made in an order, the return to removal.
Visitor comments