Note: The operation is shown using the example of replacing the left rear cable. Replacing the right cable is performed in a similar manner.
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Loosen the adjusting nut (see "Parking brake - adjustment").
3. Remove the rear wheel (see "Wheel - replacement").
4. Remove the brake pads and disconnect the parking brake system drive cable from the brake shoe lever (see "Rear brake pads - replacement").
5. Use pliers to remove the locking clip.

6. Using a slotted screwdriver, remove the rear cable tip from the connector.

7. Pull the rear cable forward from the brake shield and remove it.


Visitor comments