2. Remove the rear wheel from the vehicle.
3. Remove the rear suspension spring.
4. To turn away a fastening nut and to disconnect a spindle of a power shaft of a back wheel from a wheel nave.
5. Disconnect the lower shock absorber mount.
6. Loosen the bolt (1) lower arm rear suspension.
Note.
- Replace bolt (1) new after each removal.
- Tightening torque: 150 Nm + 60°+ 15°.
- Tighten the nut while holding the bolt from turning.
7. Remove two bolts (2) rear suspension lower control arm.
Note
- Replace bolts (2) new after each removal.
- Tightening torque: 115 Nm + 90°+ 15°.
- Tighten the nut while holding the bolt from turning.
8. Remove the lower rear suspension arm (3).
9. Installation is made in an order, the return to removal.
Note. A suitable hydraulic jack must be used to relieve the suspension while tightening the screw connections.
Visitor comments