1. Disconnect the wire from the terminal «minus» battery.
2. Remove the steering wheel (see Removal and installation of a steering wheel).
3. Remove the steering column covers (see Removal and installation of casings of a steering column).
Note. For clarity, the steering column switch module has been removed.
4. Grab the instrument cluster visor at the rear..
5.... and, overcoming the force of the spring clips, remove the visor of the instrument cluster.
6. Turn out two screws of fastening of a combination of devices …
7.... and, pressing the latch..
8.... remove the instrument cluster from the socket in the instrument panel.
9. Press the lock of the holder of the wiring harness block..
10.... fold out the holder..
11.... disconnect the wiring harness block from the instrument cluster and remove the combination.
12. Install the removed parts in the reverse order of removal.
Visitor comments