Contents: Removal ⬇ Installation ⬇
Removal
1. Disconnect the negative cable from the battery.
2. Disconnect the wiring from the potentiometer (see illustration).
3. Unscrew the two mounting screws (size TX 25) and remove the potentiometer
Installation
4. Installation is carried out in the reverse order of removal, pay attention to the following.
(Text copied from an online resource: «opelbook»)
- a) Install the potentiometer with the throttle valve fully closed and ensure that the adapter is correctly positioned on the throttle shaft.
- b) Carefully tighten the screws to the specified tightening torque Specifics.
Visitor comments