1. With the engine not running, unscrew the tank cap and fill the fluid up to the "Max" mark.
2. Wait at least two minutes for the fluid to fill the system.
3. Start the engine, let it idle for a few minutes and stop it. Do not turn the steering wheel during this time.
4. Check the fluid level in the tank again and top up if necessary.
5. Repeat the above process until the liquid level is constant.
6. Raise the front of the car, lifting the wheels off the ground.
7. Start the engine and slowly turn the steering wheel from left to right so that it gently approaches the stop, but does not touch it.
8. Monitor the fluid level in the tank and top up if necessary.
9. Lower the car back onto its wheels and slowly turn the steering wheel the other way to the other stop.
10. Stop the engine.
11. Check the fluid level and top up if necessary.
12. If the liquid foams heavily during the above steps, wait a few minutes and repeat the air removal process.
Visitor comments