Photo 43.1 Remove the exterior mirror handle cover...
2.Remove the triangle shaped plate (see photo 43.2).
Photo 43.2...then remove the plate...
3. Unscrew the three mirror mounting screws, which are now clearly visible, and ask an assistant to support the mirror from the outside (see photo 43.3).
Photo 43.3... and unscrew the mounting screws
4. Reinstallation is carried out by performing the above steps in reverse order.
Installation after an accident
5. For safety reasons, the manual mirror is designed in such a way that it will be thrown out of its mount upon impact.
6. In order to replace the knocked-out mirror, place it in place. Make sure the fasteners are properly installed, then push the mirror into place with your hand.
Visitor comments