Remove the piston with the connecting rod.
Remove the piston rings with piston ring pliers.
Clean the annular grooves.
Clean the piston ring grooves of the rectangular compression ring, tapered compression ring and oil scraper ring using the broken piston ring.
Check clearance.
Install the piston rings in the cylinder.
Check the gap with a feeler gauge.
Check the vertical clearance of the piston ring in the piston ring groove with a feeler gauge.
Rectangular compression ring.
Conical compression ring.
Oil ring.
Install piston rings.
Install the piston rings in the annular grooves, special pliers.
Marking «TOP» should be on top.
Set piston ring clearances.
First piston ring (right ring) in position 1.
Second piston ring in position 4.
Oil scraper ring spacer in position, oil scraper discs in position and/or 3.
The lug on the connecting rod must face towards the gearbox.
Visitor comments