Corsa C models
1. Set the steering column to its highest position (see chapter «Controls and methods of operation»).
2. Using a screwdriver, press out the 2 upper locks of the glove box on the instrument panel to the left of the steering column (see resist. illustration) and remove the box.
40.2. screws (indicated by arrows) fixing the lower decorative cover (2) under steering column (Corsa C models): 1. Glove box locks
3. Remove 2 fixing screws (see illustration 40.2), pull down from the upper holders and remove the lower decorative cover from the instrument panel.
4. Installation is carried out in the reverse order.
Meriva Models
5. Remove the steering column trim panels (see Chapter 12, Section 23).
6. Remove 2 fixing screws (see resist. illustration) and remove the lower decorative cover under the steering column.
40.6. screws (2) decorative cover fasteners (1) under steering column (Meriva models)
7. Installation is carried out in the reverse order.
Visitor comments