Removal and installation the switch and electric motor for adjusting the range of the light (Corsa and Combo models) (Opel Corsa B)

1. Using two small screwdrivers, carefully pry the switch from the top and bottom and remove it.

Removal the switch



2. Insert the switch into the hole in the instrument panel.

3. Remove the headlights (see sections Replacing headlight bulbs and Replacing bulbs in headlights, parking lights and front turn signals on Tigra).

4. Turn the adjusting motor to the left while holding the reflector. Remove the motor with the ball pin from the ball joint.

Removal the electric motor



5. Press the ball pin of the electric motor into the thrust bearing.

6. Turn the range adjustment motor 60 degrees to the right and thus fix it.

7. Install and adjust the headlights.

[Original article on the web portal: www.opelbook.ru]