1. Open the hood and fix it with a stop rod.
2. To provide access to the right headlight, remove the air intake pipe (see chapter Power supply systems, release and reduction of toxicity of exhaust gases).
3. Turn off the headlight, disconnect the connector on the back of the headlight. Remove the rubber cover.
Disconnecting the headlight connector and removing the rubber cover
4. Disconnect the spring clip of the lamp holder from the locking bars and fold it out.
Removing the lamp holder bracket
5. Remove the incandescent lamp.
6. Insert a new lamp so that the tabs of the lamp holder fit into the grooves of the reflector. In this case, take the lamp only by the cartridge, and not by the flask. Remove the traces of hands remaining on the lamp with a clean handkerchief dipped in alcohol.
7. Press the lamp with the bracket.
8. Install the headlight cover.
9. Connect the lamp connector.
10. Near the right headlight, insert the air duct into the air filter and fix its sleeve on the front cross member of the body by turning the clamp 90 degrees.
11. Check headlight adjustment.
Visitor comments