Disconnect the corresponding circuit before replacing the lamp.
Attention: Do not touch the lamp bulb with bare fingers. Fingerprints will evaporate and settle on the reflector, which will darken it. You need to replace the lamp with the same one. Any stains should be wiped off with a clean, lint-free cloth dampened with alcohol.
Removing
Raise and secure the hood.
Disconnect the plug with the cable from the pump.
Remove headlight cover.
Squeeze the mounting bracket and turn to pull the lamp out of the reflector housing.
Installation
Insert a new lamp so that the latch nose on the lamp plate fits into the slot of the reflector.
Fasten the lamp with a bracket.
Connect headlight cover and plug.
Halogen headlights
Removing
Loosen both fixing bolts at the bottom of the headlight housing. Hold the headlight with your hand so that it does not fall out. Pull the headlight down from the housing.
Unclip and turn the spring terminals.
Remove the lamp from the socket, disconnect the cable.
Installation
Connect the cable to the lamp. Insert lamp. The grooves in the lamp dish must match the protrusions of the reflector.
Compress the spring terminals.
Insert headlamp optic and secure with screws.
Visitor comments