E/motor of a drive of the lock of a door
1. Remove the door lock (see chapter Body).
2. Turn out screws of fastening and remove the e/motor from the lock.
E/motor of a drive of the lock of a forward door
3. Fix the e/motor on the lock and adjust its position.
4. Install the door lock.
E/motor of a drive of the lock of a cover of a fuel tank
1. Remove the luggage compartment side trim.
2. Remove the rear combination lamp.
3. Turn out screws of fastening and remove the e/motor from a lateral wall.
4. Disconnect the e/motor connector.
5. Install the removed components in the reverse order of their removal.
E/motor of a drive of the lock of a door of a back
1. Remove tailgate trim (see chapter Body).
2. Turn out screws of fastening and remove the e/motor from a back door.
Screws of fastening e/motor
3. Disconnect the e/motor connector.
4. Disconnect the drive rod from the lock cylinder.
5. Insert the drive rod into the e/motor and connect it to the lock cylinder.
6. Connect the e/motor connector.
7. Fasten the e/motor with screws on the tailgate.
8. Fix facing of a door of a back.
Visitor comments