The tubular guide of the oil level indicator is sealed in the cylinder block with a rubber ring. In the event of an oil leak at the seal, replace this ring.
You will need: socket head TORX E11, extension, wrench.
1. Remove the oil level indicator from the guide.
2. Turn out a bolt of fastening of an arm of directing the index of level of oil to a head of the block of cylinders.
3. Remove the guide from the hole in the cylinder block.
4. Remove the sealing ring from the guide by prying it with a screwdriver.
5. Lubricate the new ring with engine oil before installation.
6. Install the sealing ring on the oil level indicator guide, and the guide on the cylinder block in the reverse order of removal.
Visitor comments