1. Before disconnecting any hydraulic line, wrap the neck of the master cylinder reservoir with polyethylene. When removing the wheel cylinders, it is recommended to pinch the hose with a small clamp.
2. To disconnect the hose from the tube, unscrew the union nut, remove the spring clip that secures the hose to the bracket. On the front brakes, the hose is attached to the suspension strut bracket with a bracket and a rubber insert (see photo).
3. Before unscrewing the nut, clean the joints and adjacent surfaces from dirt.
4. After installing the hose or tube, bleed the air from the brake circuit (see above).
Visitor comments