Removal and installation
1. Remove the cap from the brake fluid reservoir and cover the filler neck with plastic wrap.
2. Raise the car and place it on stands.
Front flexible hose
3. Remove the front wheel.
4. Unscrew the connection bolt and disconnect the hose from the caliper.
5. Remove the hose from the fittings.
6. Loosen the brake pipe connection nut and remove the hose.
Rear flexible hose
7. Remove the hose from the fittings.
8. Unscrew the nuts of the connections with the brake pipes and remove the hose.
Brake pipes
9. Unscrew the fastening nuts of the connections and remove the hose from the fasteners.
10. Installation is carried out in the reverse order of removal.
Visitor comments