1. Open the tailgate, rotate the retainer clips 90°and open the right rear combination lamp cover. Remove the protective cap and depressurize the system by pressing the center button of the valve.
2. Give a fixing nut and remove the valve from a basic arm, then bring together lock uvulas and disconnect an air highway.
3. Release a socket and disconnect a highway of the valve from the right highway laid under the bottom of the car.
4. Release the connectors and disconnect the right and left lines from the three-way fitting. Release the lines from the intermediate clips on the bottom and remove them from the vehicle.
5. Installation is carried out in the reverse order. Finally, prime the system with a pump and check for signs of air leaks.
Visitor comments