2. Disconnect the electrical wiring from the valve (see accompanying illustration) EVAP, disconnect the fuel line quick-disconnect fittings using a special tool and close the fuel passages with suitable plugs.
11.2 Valve (2) EVAP (using the example of models equipped with the Z18XE engine) - the arrow indicates the mounting bolt: 1. Electrical wiring connector; 2. Fuel lines; 3. Device Hazet-4501-1
3. Unscrew the mounting bolt (see illustration 11.2) and release the valve from the holder.
4. Installation is carried out in reverse order.
(Text copied from this portal: OpelBook.ru)
Visitor comments