Contents: Removal ⬇ Installation ⬇
Removal
1. On models with automatic transmission, to the left of the radiator is a reservoir containing a heat exchanger for cooling the transmission fluid. It is connected to the transmission by a pair of flexible hoses with metal tubes on the ends.
2. When removing the radiator, either pinch the transmission fluid cooler flexible hoses or loosen their clamps, remove the hoses from the couplings, and quickly plug each hose and coupling to minimize fluid loss and prevent dirt from entering.
Installation
3. Installation is performed in the reverse order of removal. Do not forget to check the transmission fluid level and add it to the transmission if necessary, as described in Section 7B.
Visitor comments