Contents: Removal ⬇ Installation ⬇
Trafic vehicles are equipped with a gearbox with a calibrated bore (figure 9.25).
Figure 9.25. Trafic vehicles are equipped with a gearbox with a calibrated hole: A - Evaporator side; B - Driver's side.
Removal
1. Disconnect the battery.
2. Using a filling station, drain the refrigerant from the refrigeration circuit.
3. Remove the air intake unit (figure 9.26).
Figure 9.26. Remove the air intake unit.
[Material copied from the portal: www.opelbook.ru]
4. Loosen nut A and bolt B (figure 9.27). Disconnect the high pressure line and completely unscrew the nut. Remove the gearbox using long, flat-nose pliers.
Figure 9.27. Loosen nut A and bolt B.
Installation
5. Installation is carried out in the reverse order of removal. Lubricate the line gaskets with compressor oil. Charge the refrigeration circuit with refrigerant using a charging station. When replacing the gearbox, add 10 ml of the recommended oil to the compressor.
Visitor comments