Engine X22XE
| Injection system | Bosch Motronic M.1.5.4 |
| Cylinder firing order | 1-3-4-2 |
| Fuel tank capacity, l: -SWB | 65 |
| - LWB | 75 |
| Fuel pressure, kPa (bar): - X 22 SE | 283-376 (2,83-3,76) |
| - 6VD1-W | 333-376 (3,33-3,76) |
Adjustment data for X22SE and Y22SE engines
| Engine crankshaft speed at idle, min⁻¹ | 800 |
| Maximum engine crankshaft speed, min⁻¹ | 6200 |
| Interelectrode gap of spark plugs, mm | 1,0-1,1 |
Tightening torques for threaded connections, Nm
| Central muffler flange - X22SE engine | 43 |
| - engine 6VD1-W | 43 |
| Rubber muffler mount mount | 15 |
| Fuel tank to bracket | 68 |
| Fuel tank to chassis | 68 |
X22SE and Y22SE engines
| Accelerator pedal mounting bolts | 10 |
| Bolts securing the ignition coil cover to the cylinder head cover | 3 |
| Spark plugs | 25 |
| Front exhaust pipe to exhaust manifold mounting nuts | 28 |
| Fuel rail to intake manifold mounting bolts | 8 |
| Air filter housing mounting bolts | 22 |
| Throttle body mounting bolts | 9 |
| Crankshaft position sensor mounting bolt | 8 |
| Oxygen concentration sensor | 50 |
| Engine control unit mounting bolts | 7 |
| Knock sensor mounting bolt | 20 |
| Ignition coil mounting bolts to bracket | 20 |
| Camshaft Position Sensor Mounting Bolt | 6 |
| Intake Manifold Pressure Sensor | 8 |
| Gearbox protection mounting bolts | 38 |
Engine 6VD1-W
| Rear Oxygen Sensor | 42 |
| Front right oxygen concentration sensor | 42 |
| Front left oxygen concentration sensor | 42 |
| Exhaust manifold to cylinder head mounting nuts | 52 |
| Front exhaust pipe to exhaust manifold mounting nuts | 43 |
| Spark plugs | 18 |
| Crankshaft position sensor mounting bolt | 10 |
| Fuel rail mounting bolts | 25 |
| Coolant temperature sensor | 30 |
| Engine Air Intake Temperature Sensor | 4 |
| Knock sensor | 20 |
| Throttle assembly | 25 |
| Camshaft Position Sensor | 9 |
| Accelerator pedal mounting bolts | 10 |
| Gearbox protection mounting bolts | 38 |
The source is on the online website [opelbook]
Visitor comments