Hazard warning light switch (Opel Frontera B)

Removal

Disconnect the cable from the negative battery terminal.

Remove the instrument cluster trim (1) from the instrument panel (see the relevant chapter).



Squeeze the tabs and disconnect the connector from the switch.

On the back of the switch, squeeze the latches and remove the switch (2) from the instrument cluster trim.

Installation

Insert the switch into the socket of the instrument cluster trim and press it until the latches click into place.

(The article was published on the website: www.OPELBOOK.ru)

Connect the connector to the hazard warning light switch, making sure that the connector latches lock into place.

Install the instrument cluster trim onto the instrument panel (see the relevant chapter).

Connect the cable to the negative terminal of the battery.