2. Clean the belt with a damp cloth and a small amount of detergent, and nothing more.
3. Never change the fastening of the original belt, and when belts are replaced, always carefully follow the sequence of installing the parts. If washers or spacers are not installed correctly, the belt will not perform as originally intended (see photo 41.3).
Photo 41.3 Bolt securing the seat belt to the floor
4. On two-door models, the belt receiving mechanism is hidden behind the rear trim panel. To access this mechanism, remove the panel.
5. This is done in this way: first the seat is removed, then the panel clamps are released from their holes, the panel is removed by hand, as described in Section 12.
Figure 11.58. Installing seat belts on a two-door model
Visitor comments