Removing
Remove the front wheel.
Mark the position relative to the wheel hub.
Remove the steering knuckle from the steering knuckle.
Remove screw 1.
Remove the control arm from the front axle housing front and rear.
Unscrew screw with nut 3.
Remove screw 2.
Installation
Install the control arm to the front axle housing front and rear.
Loosely tighten the screw with the nut.
Loosely tighten screw 2.
Install the steering knuckle onto the steering knuckle.
Tighten the new nut to 60 Nm.
Attach the control arm to the front axle housing front and rear.
Tighten screw with nut 3 90 Nm + 75°+ 15°.
Loosely tighten screw 2 90 Nm + 75°+ 15°.
Install the front wheel.
Visitor comments