Wheel rotation (Opel Corsa C)

20. Wheel rotation should be performed when signs of uneven tread wear are detected. The rotation procedure is shown in the accompanying illustration; the spare wheel is not involved in the rotation.



21. When equipping your vehicle with tires with a directional tread pattern, ensure that they are installed correctly while maintaining the direction of rotation of the wheels.

22. When rotating, the vehicle must be raised off the ground - take advantage of the opportunity to also check the condition of the brake system components (see Section 14). A detailed description of the wheel changing procedure is provided in Section "Jacking and towing". Make sure the vehicle is securely fixed in the raised position. Clean the wheel assemblies thoroughly from the inside at each rotation.

(Material provided by this website: «opelbook.ru»)

23. After completing the rotation, check the tire inflation pressure and adjust it according to regulatory requirements. Make sure that the wheels are securely fastened with bolts (ideally, wheel bolts should be tightened with a torque wrench).