1. Open the hood.
2. Mark the position of the bolts on the hood hinges (see photo).
3. Turn away bolts of fastening to loops and with the assistant remove a cowl.
4. Installation is carried out in the reverse order. Tighten the mounting bolts, lower the hood and make sure that the hood lock latch comes in the center of the lock. With the hood closed, make sure that the gaps between the edge of the hood and the fenders are the same on both sides. The hood must be flush with adjacent panels. If necessary, loosen the hinge bolts and adjust the position of the hood, tighten the bolts. Height adjustment of the hood is provided by bolts attaching the hinges to the body or by changing the height of the lock retainer and rubber buffers (see photo).
Visitor comments