1. Fully open the luggage compartment lid.
2. On models with a single lock, disconnect the negative cable from the battery and the wiring from the lock activator - if the old cover is installed, tie a piece of wire to the end of the wiring harness. Pull the wiring harness through the hole in the cover and untie the wire from it, leaving it threaded through the hole.
3. Mark the position of the hinge straps on the lid with a marker.
4. Ask the assistant to hold a cover and give bolts of fastening of loops. Remove the cover from the car.
5. If a new cover is being installed, transfer all removable components to the cover.
6. Installation is carried out in the reverse order. If necessary, loosen the hinge bolts and make an appropriate adjustment to the position of the cover, also adjust the position of the rubber pads and the striker of the lock - the cover should sit evenly in the opening and be flush with the surrounding body elements.
Visitor comments