1. Slide the sunroof all the way back and half open the glass panel.
2. Turn out four bolts located from a forward edge of a glass panel and remove a cover.
3. Remove the guide bolts on both sides of the panel.
4. Gently lift the glass panel and remove it from the hatch through the top - try not to damage the paintwork of the roof. Assess the degree of wear and general condition of the seals and replace them if necessary.
5. Installation is carried out in the reverse order. If necessary, adjust the height of the front edge of the panel so that it is no lower than 1.0 mm from the level of the roof surface. The rear edge of the glass panel must be flush with the roof surface, or no more than 1.0 mm higher.
Visitor comments