Telescopic stands
1. Open the tailgate fully and have an assistant hold it.
2. Prying with a screwdriver, release the spring clips and disconnect the posts from the door hinges (see illustration Tailgate Installation Details (Hatchback and Wagon models)).
3. Installation is carried out in the reverse order.
Lock
1. With the door open, remove the bottom section of the upholstery panel (see Removal and installation of interior trim panels).
2. Through an opening in the internal panel of a door release a plastic clamp and disconnect draft of management of the lock.
3. Turn out fixing screws and remove the lock.
A - Screws for fastening the lock assembly (Astra models)
B - Screws for fastening the lock assembly (Zafira models)
A.
B.
4. Installation is carried out in the reverse order - if necessary, correct the position of the drummer.
Lock cylinder
1. With the door open, remove the bottom section of the upholstery panel (see Removal and installation of interior trim panels).
2. Through an opening in the internal panel of a door release a plastic clamp and disconnect draft of management of the lock.
3. Give fixing nuts and take the cylinder of the lock from a door.
4. Installation is carried out in the reverse order.
Castle striker
The striker of the lock is screwed to the lower body panel.
1. If necessary, unscrew the fixing screws and remove the rear decorative panel in order to provide access to the hammer fixing screws.
2. Before removing the striker, circle it with a marker.
3. Turn out fixing screws and remove a drummer.
4. Installation is carried out in the reverse order. Adjust the striker position if necessary.
Pen
1. Open the door and remove the lower section of its interior upholstery (see Removal and installation of interior trim panels).
2. Give two fixing nuts and remove the handle from a door.
3. Installation is carried out in the reverse order.
Visitor comments