Warning! Do not separate the power steering pump from the bracket. New pumps are supplied with brackets.
Removing
1. Using clamps, pinch the supply and return hoses near the tank.
2. Remove the auxiliary drive belt.
3. Remove the air conditioning compressor.
4. Position a container under the power steering pump and disconnect the pressure line from the pump.
5. Loosen the clamp and disconnect the return tube from the pump.
6. Remove the bolt securing the dipstick tube to the pump and move the tube aside.
7. Unscrew the bolts securing the pump bracket to the engine and remove the pump from under the engine.
Installation
Installation is made in sequence, return to removal. Pour fresh fluid into the power steering hydraulic system and bleed the air.
Visitor comments