Windshield and rear window wipers
Removing
1. Before removing the wiper arm, the wiper motor must be in its original position. Mark the position of the brush on the glass with adhesive tape.
2. Lift the covers and unscrew the nuts and washers securing the levers to the axle.
3. Using a screwdriver, remove the levers from the axles. Don't damage the coloring.
Installation
4. Installation is carried out in the reverse order. Note that the passenger wiper arm is longer than the driver's (see illustration).
Headlight wipers
5. The procedure is the same as in points 1-4, but the washer hose must be disconnected from the nozzle on the body panel.
Visitor comments