Contents: Models before 1990. ⬇ Models since 1991. ⬇
Models before 1990.
Removal
1. To remove the jet, gently pry it away from its place using a thin screwdriver. Do not damage the paint.
2. Disconnect the washer hose and remove the nozzle.
Installation
3. To install, reconnect the washer hose to the jet and install the jets in place.
4. To adjust the jets, insert the needle into the nozzle and turn the nozzle to the desired position.
Models since 1991.
5. Jets on later models - equipped with double jets.
6. Some later models are equipped with heated jets.
(Material was taken from a resource: «www.OpelBook.ru»)
Visitor comments