Removal and installation the clutch master cylinder (Opel Corsa C)

1. The clutch master cylinder is mounted on the rear bulkhead of the engine compartment.

2. Remove the clutch pedal (see Section 5).

3. Bring the brake fluid level in the reservoir to the "MAX" mark, close the reservoir using the MKM-558-10 plug.

4. Remove the retainer on the clutch master cylinder connector (see accompanying illustration), place a hose connecting the cylinder to the reservoir, a ball of rags to collect spilled brake fluid and disconnect the hose from the reservoir.



5. Remove the clutch master cylinder (see illustration 1.1).

6. Installation is carried out in the reverse order. Do not forget to bleed the hydraulic circuit (see Section 4).