1. Remove the insulator of the lower lining of the dashboard.
2. Remove the cruise control switch from the clutch pedal.
3. Remove the expansion tank of the cooling system.
4. Unhook the return spring (1) on the back of the clutch pedal.
5. Release the master cylinder rod clamps and lift the clutch pedal up, then disconnect the clutch master cylinder rod (2).
6. Unhook the clips from the pedal unit, turn the clips inside the clutch pedal and unscrew the nuts of the clutch pedal (3). Tightening torque: 22 Nm.
7. Unhook the inlet pipe (4) from the clutch master cylinder.
8. Remove the retainer (5) up to disconnect the outlet pipe from the clutch master cylinder.
9. Disconnect the modulator (6) from the clutch master cylinder.
10. Remove clutch master cylinder (7).
11. Installation is made in an order, the return to removal. After installation, it is necessary to bleed the hydraulic clutch.
Visitor comments