Removal / installation of side deflectors
11. Wring out with a plastic wedge (e.g. Hazet 196520) top and bottom deflector brackets (see resist. illustration) and remove it from the instrument panel.
10.11 Removing the side deflector (2) with a plastic wedge (1) (Meriva models) - arrows indicate nozzle clamps
12. When installing, insert the deflector into the seat and press until it locks.
Removal / installation of central deflectors
13. Remove the panel of facing of the right steering column switch (see chapter 11).
14. Remove the bottom facing of a steering column.
15. Remove facing of a combination of devices (see chapter 11).
16. Remove the instrument panel trim above the main glove box (see chapter 11).
17. Turn out 2 fixing screws, wring out the case of the central deflectors down and release from the top clamps (see resist. illustration).
10.17. screws (1) fasteners Center deflector housings (Meriva models) - the arrows indicate the upper latches: 2. Electrical wiring connector
18. Remove the housing together with the deflectors from the instrument panel and disconnect the connector (see illustration 10.17) electrical wiring on the back of the case.
19. Installation is carried out in the reverse order of removal.
Visitor comments