The serially produced antenna is installed in the rear part of the roof. The antenna does not require maintenance and can be removed. There is a hole in the roof for installing the antenna, closed with a plug.
1. Detach the roof lining in the rear part of the passenger compartment (see Chapter Body).
2. Remove the left side trim panel.
3. Press out the plug of the square hole for the antenna.
4. Install the antenna and secure it.
5. Route the antenna wire along the wiring harness and connect it to the radio.
Material copied from this resource www.OpelBook.ru
Antenna wire route
6. Install the removed trim.
Visitor comments