1. Remove the wiper.
2. Mark with a felt-tip pen the position of the wiper rods and the crank relative to the e/motor axis.
3. Disconnect the drive mechanism from the e/motor.
Disconnecting the drive mechanism
4. Disconnect the connector (1).
Socket and fixture of the e/motor of a screen wiper
5. Give fixture of bars of a screen wiper and remove the e/motor. Replace damaged parts.
6. If a new e/motor is installed, set it to the parking position. To do this, connect the connector and start the e / motor. Then stop it with the wiper switch and let it come to its final position.
7. Install all removed components.
Visitor comments