2. Install a new gasket on the cylinder head cover (1). Make sure the gasket is inserted into the correct groove in the cylinder head cover.
3. Install the cover on the cylinder head and tighten the bolts by hand.
4. Install ignition coils. Tighten ignition coil bolts to 10 Nm.
5. Tighten the cylinder head cover bolts to 10 Nm.
6. Install the solenoid valves for the camshaft shifters.
Note. The solenoid valves of the phase shifters are labeled for intake (intake) and release (exhaust).
7. Install the bolts of the solenoid valves of the phase shifters and tighten to 10 Nm.
8. Install the camshaft housing insulator cover (1) and tighten the mounting bolts to 10 Nm.
9. Install the front lifting eye (1) and tighten the mounting bolts to 25 Nm.
10. Install a new O-ring for the brake booster pump.
11. Install the vacuum brake booster pump.
Note. Make sure the exhaust camshaft is aligned with the vacuum booster pump.
12. Install the brake booster pump bolts and tighten to 22 Nm.
13. Install the rear lifting eye and tighten the mounting bolts to 25 Nm.
Visitor comments