1. Intake camshaft phase shifter solenoid valve.
2. Intake camshaft phase shifter solenoid valve bolt.
3. Exhaust camshaft phase shifter solenoid valve bolt.
4. Exhaust camshaft phase shifter solenoid valve.
5. Bushing of the upper screen of the intake manifold.
6. Ball pin.
7. Bushing of the upper screen of the intake manifold.
8. Fitting of the pressure pipe for cooling the turbocharger.
9. Laying of a pressure head hose of cooling of a turbocompressor.
10. Turbocharger cooling pressure hose clamp.
11. Turbocharger cooling pressure hose.
12. Turbocharger cooling pressure hose bolt.
13. Laying of a pressure head hose of cooling of a turbocompressor.
14. Turbocharger cooling pressure hose clamp.
15. Bushing of the upper screen of the intake manifold.
16. Ball pin.
17. Ignition coil bolt.
18. Ignition coil bolt holder.
19. Ignition coil.
20. Spark plug.
21. Bolt of a cover of a head of the block of cylinders.
22. The holder of a bolt of a cover of a head of the block of cylinders.
23. Oil filler cap.
24. Oil filler cap seal.
25. Cylinder head cover.
26. Camshaft housing cover insulator.
27. Bolt of an insulator of a cover of the case of camshafts.
28. Cylinder head cover seal.
29. Cylinder head cover seal.
30. Camshaft bearing cap bolt.
31. Camshaft bearing front cover.
32. Camshaft bearing cap.
33. Camshaft bearing front cover.
34. Camshaft rear bearing cover bolt.
35. Cover of the rear bearing of the exhaust camshaft.
36. Camshaft rear bearing cover bolt.
37. Cover of the rear bearing of the intake camshaft.
38. Seal for the vacuum brake booster pump.
39. Vacuum brake booster pump.
40. Bolt of the vacuum brake booster pump.
41. Camshaft position sensor bolt.
42. Camshaft position sensor.
43. O-ring camshaft position sensor.
44. Exhaust camshaft.
45. Intake camshaft.
46. Roller rocker.
47. Hydraulic gap compensator.
48. Cylinder head bolt.
49. Fitting for removing air from the cooling system.
50. Hydraulic gap compensator.
51. Roller rocker.
52. Rusks.
53. Valve plates.
54. Valve springs.
55. Oil caps.
56. Small cylinder head bolt.
57. Cylinder head.
58. Access hole for the timing chain guide bolt.
59. Exhaust valve.
60. Inlet valve.
61. Camshaft position sensor bolt.
62. Intake camshaft position sensor.
63. O-ring camshaft position sensor.
64. Cylinder head oil gallery plug.
65. Rear lifting eye of the engine.
66. Bolt of the rear rigging eye of the engine.
67. Cylinder head cover plate seal.
68. Cylinder head cover plate.
69. Cylinder head cover plate bolt.
70. Fuel injector clamp.
71. Fuel injector seal.
72. Fuel injector.
73. O-ring fuel injector.
74. Fuel rail.
75. Pressure sensor in the fuel rail.
76. Fuel injector wiring harness.
77. Fuel rail bolt.
Visitor comments