2. Remove both center deflectors.
3. Remove the fan mode switch knob.
4. Remove the anti-theft alarm switch.
5. If equipped, remove the front seat heating switch with a suitable hook.
6. Remove the air ventilation mode switch knob.
Removing the ventilation mode switch knob
7. Remove the ventilation mode switch cover.
Removing the Ventilation Mode Switch Cover
8. Remove the fixing screws (1) and remove the control box panel.
Screws of fastening of the panel of the block of management of a heater
9. Disconnect cables (1, 2, 4, 5) from the control unit and disconnect the wiring connector. Pull connector (3).
Ropes (1, 2, 4, 5) and connector (3) control unit
№ | Damper rod | Color |
1 | foot wells | Grey |
2 | Ventilation and blowing of a windshield | Brown |
4 | air duct | Black |
5 | Ventilation | Blue |
10. Turn out screws of fastening (2). Disconnect the control unit and the deflector housing from the panel by depressing the latches (1).
Mounting screws (2) and clamps (1) control unit
11. Installation is carried out in the reverse order. Set damper rods according to with illustration.
Visitor comments