All installed deflectors are identical and interchangeable.
1. To remove the central deflectors, turn the deflector grille with a plastic wedge back through the stop so that a gap of 1.5 cm wide is formed at the upper edge (refer to fragment A). Remove the insert from the cam with a screwdriver through the resulting gap and remove it upwards from the housing (refer to fragment B).
Removing the central deflectors
2. To remove the side deflectors, unscrew the mounting screws, remove the housing and remove it from the seal.
Screws of fastening of the right deflector
The left deflector is attached with four screws.
3. Installation is carried out in the reverse order.
Visitor comments