1. Set the rotary switch for outdoor lighting to position «0» (see chapter «Controls and methods of operation», Section 17) and turn off the ignition. Disconnect the battery (see chapter 5).
2. Raise the vehicle on a lift.
3. Disconnect the wiring connector (see resist. illustration) fog lamp, unscrew the 3 mounting bolts from the back of the front bumper cover and remove the fog lamp.
4. Installation is carried out in the reverse order.
5. After installation, adjust the direction of the optical axes of the fog lights - access to the adjusting bolt is through the decorative grille of the fog light. At the first opportunity, check the adjustment at the service station using special equipment.
Visitor comments